After download this two files and remove the disk:
_ _ _ _
| | | | | | | |
___| |__ _ _| |_| |_| | ___
/ __| '_ \| | | | __| __| |/ _ \
\__ \ | | | |_| | |_| |_| | __/
|___/_| |_|\__,_|\__|\__|_|\___|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
U-Boot 1.1.2 (Jan 24 2015 - 13:54:11)
U-Boot code: 60D00000 -> 60D25978 BSS: -> 60D3A680
IRQ Stack: 60cddf7c
FIQ Stack: 60cdcf7c
RAM Configuration:
Bank #0: 60000000 256 MB
SRAM Configuration:
64KB at 0x50000000
NAND:128 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Setting Linux mem= boot arg value
Hit any key to stop autoboot: 0
IDE device 0: not available
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: đNo devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: ŕNo devices found
disk is not present!
enable_interrupts
Reset IDE: Detecting SATA busses:
Bus 0: No devices found
disk is not present!
Wait GMAC to reset
Wait for PHY reset
PHY is IC+ IP1001LF
Wait for link to come up.........Stage-1 Bootloader 2012-06.13-13:06:32
Attempting to set PLLA to 750MHz ...
plla_ctrl0 : 0x0000000A
plla_ctrl1 : 0x000F0000
plla_ctrl2 : 0x001D01A0
plla_ctrl3 : 0x00000017
PLLA Set
Setup memory, testing, Image 0
Failed to correct error
Failed to correct error
Hdr len: 0xA1A2A3A4
Hdr CRC: 0xB1B2B3B4
read failed, Image 1
Failed to correct error
Failed to correct error
Hdr len: 0xA1A2A3A4
Hdr CRC: 0xB1B2B3B4
read failed, Image 0
Failed to correct error
Failed to correct error
Hdr len: 0xA1A2A3A4