Thanks to both of you.
I tried to add to
dts:
Compiling was ok, but the kernel panics:
But if I let the sata_oxnas.c untouched, the kernel is booting, and finds both ports but there are some errors on port 2. But port 1, here sdb, seams to work ok.
So maybe someone has an idea how to fix somethink here.
I tried to add to
dts:
sata@45910000 { status = "okay"; };dtsi:
sata@45910000 { compatible = "plxtech,nas782x-sata"; /* port sgdma core */ reg = <0x45910000 0x100>, <0x459B0010 0x10>, <0x459E0000 0x2000>, /* phy descriptors (optional) */ <0x44900000 0x0C>, <0x50000000 0x1000>; interrupts = <0 18 0x304>; clocks = <&stdclk 4>; resets = <&rst 11>, <&rst 12>, <&rst 13>; reset-names = "sata", "link", "phy"; status = "disabled"; };And changed the max ports from 1 to 2. in the sata_oxnas.c
SATA_OXNAS_MAX_PORTS = 2
Compiling was ok, but the kernel panics:
Reading data from 0x4bf800 -- 100% complete. 2621440 bytes read: OK ## Booting image at 60500000 ... Image Name: Linux-3.11.1+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3386100 Bytes = 3.2 MB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 64000000 ... Image Name: Wheezy Ramdisk Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 1841056 Bytes = 1.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.3 (peacemaker@DebianWheezy) (gcc version 4.4.5 (Debian 4.4.5-8) ) #8 SMP Tue Sep 30 16:59:21 CEST 2014 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Shuttle KD20 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 7 pages/cpu @cfde2000 s6496 r8192 d13984 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/sdc1 console=ttyS0,115200 mac_adr=0x00,0x25,0xb1,0xff,0xff,0x00 mem=256M poweroutage=yes [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 253076K/262144K available (4748K kernel code, 212K rwdata, 1340K rodata, 154K init, 226K bss, 9068K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc05fa448 (6090 kB) [ 0.000000] .init : 0xc05fb000 - 0xc0621960 ( 155 kB) [ 0.000000] .data : 0xc0622000 - 0xc06572e0 ( 213 kB) [ 0.000000] .bss : 0xc06572e8 - 0xc068fb60 ( 227 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000192] Console: colour dummy device 80x30 [ 0.000220] Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896) [ 0.050035] pid_max: default: 32768 minimum: 301 [ 0.050170] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050186] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050897] CPU: Testing write buffer coherency: ok [ 0.051235] Setting up static identity map for 0x6048ad90 - 0x6048adc8 [ 0.052725] CPU1: Booted secondary processor [ 0.110192] Brought up 2 CPUs [ 0.110213] SMP: Total of 2 processors activated. [ 0.111093] devtmpfs: initialized [ 0.114024] pinctrl core: initialized pinctrl subsystem [ 0.116177] NET: Registered protocol family 16 [ 0.116664] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.120017] gpio-oxnas 44000000.gpio: at address d0846000 [ 0.120258] gpio-oxnas 44100000.gpio: at address d0848000 [ 0.120647] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver [ 0.238046] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5 [ 0.248348] oxnas-pcie 47c0: link up [ 0.248558] oxnas-pcie 47c0: PCI host bridge to bus 0000:00 [ 0.248581] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.248596] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.248611] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff] [ 0.248627] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.249072] PCI: bus0: Fast back to back transfers disabled [ 0.249146] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48007fff 64bit] [ 0.249482] vgaarb: loaded [ 0.249838] SCSI subsystem initialized [ 0.250549] usbcore: registered new interface driver usbfs [ 0.250636] usbcore: registered new interface driver hub [ 0.250836] usbcore: registered new device driver usb [ 0.250920] pps_core: LinuxPPS API ver. 1 registered [ 0.250933] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.250964] PTP clock support registered [ 0.252103] cfg80211: Calling CRDA to update world regulatory domain [ 0.252387] Switched to clocksource rps_clocksource_timer [ 0.264279] NET: Registered protocol family 2 [ 0.264867] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.264929] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.264983] TCP: Hash tables configured (established 2048 bind 2048) [ 0.265059] TCP: reno registered [ 0.265085] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.265126] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.265354] NET: Registered protocol family 1 [ 0.265779] RPC: Registered named UNIX socket transport module. [ 0.265799] RPC: Registered udp transport module. [ 0.265809] RPC: Registered tcp transport module. [ 0.265817] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.265858] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 0.266777] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.280074] fuse init (API version 7.23) [ 0.280768] msgmni has been set to 494 [ 0.282429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.282449] io scheduler noop registered [ 0.282462] io scheduler deadline registered [ 0.282744] io scheduler cfq registered (default) [ 0.283176] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.284295] console [ttyS0] disabled [ 0.284334] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 0.787479] console [ttyS0] enabled [ 0.791895] Unable to handle kernel NULL pointer dereference at virtual address 00000070 [ 0.800005] pgd = c0004000 [ 0.802698] [00000070] *pgd=00000000 [ 0.806266] Internal error: Oops: 805 [#1] SMP ARM [ 0.811025] Modules linked in: [ 0.814062] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.3 #8 [ 0.819947] task: cf840000 ti: cf844000 task.ti: cf844000 [ 0.825326] PC is at sata_oxnas_link_write+0x14/0x50 [ 0.830264] LR is at sata_oxnas_post_reset_init+0x3c/0x178 [ 0.835719] pc : [<c029cde8>] lr : [<c029d404>] psr: 80000113 [ 0.835719] sp : cf845d80 ip : c06465c0 fp : cf8b3610 [ 0.847137] r10: cf87f198 r9 : c029dc34 r8 : 00002368 [ 0.852331] r7 : cf8b3610 r6 : 00000000 r5 : cf9d8000 r4 : cf87d880 [ 0.858818] r3 : 00000000 r2 : 00030003 r1 : 0000000c r0 : 00000000 [ 0.865310] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 0.872578] Control: 00c5787d Table: 6000400a DAC: 00000015 [ 0.878289] Process swapper/0 (pid: 1, stack limit = 0xcf8441c0) [ 0.884259] Stack: (0xcf845d80 to 0xcf846000) [ 0.888596] 5d80: cf9d8000 cf87d880 cf87f130 cf8b3610 cf9d8000 c029dc34 cf87f198 c029d618 [ 0.896734] 5da0: 00000001 cf87f198 c029dc34 50000800 cf9d4000 00000001 cf87f190 00000000 [ 0.904872] 5dc0: cf87d830 c02873ac cf87f190 00000032 c0646620 00000080 d085a000 c029dc34 [ 0.913011] 5de0: 00000000 c0288018 d085a000 c0287994 00000000 cf807300 cf807300 d085e000 [ 0.921152] 5e00: d085c000 d0860000 d085a000 cf87f130 00000000 c029dbc8 c0646620 00000000 [ 0.929287] 5e20: 00000001 50000000 50000fff cfdf7dc0 00000200 00000000 00000000 00000000 [ 0.937428] 5e40: c04a2884 00000000 00000000 cf8b3610 c06465c4 c06465d8 00000000 00000000 [ 0.945566] 5e60: c061f33c c0683868 00000000 c026e380 c0683868 cf8b3610 c06465d8 c026d108 [ 0.953704] 5e80: cf8b3610 c06465d8 cf8b3644 00000000 0000008d c061f33c c0617c18 c026d328 [ 0.961845] 5ea0: c06465d8 c026d29c cf845eb0 c026bb14 cf82445c cf8b40f4 c06457b8 c06465d8 [ 0.969984] 5ec0: cf87f0c0 c06457b8 00000000 c026c2e4 c059471c c026d6bc c06465d8 c06465d8 [ 0.978122] 5ee0: 00000007 cf844000 00000000 c026d68c c060edcc 00000007 cf844000 c00087f0 [ 0.986260] 5f00: c067ad88 cf845f3c 00000000 00000000 00000000 c010847c 00000000 cf8a1540 [ 0.994401] 5f20: 00000000 c06354e8 60000113 00000000 c05daa7c cfffc19f c05daa8c c00306f0 [ 1.002539] 5f40: c05a0b90 c05da1bc 00000006 00000006 c06354b8 c0617c10 00000007 c0657300 [ 1.010677] 5f60: c05fb5dc 0000008d c061f33c c0617c18 00000000 c05fb50c 00000006 00000006 [ 1.018816] 5f80: c05fb5dc 00000000 00000000 c048503c 00000000 00000000 00000000 00000000 [ 1.026954] 5fa0: 00000000 c0485044 00000000 c0009558 00000000 00000000 00000000 00000000 [ 1.035092] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.043228] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.051371] [<c029cde8>] (sata_oxnas_link_write) from [<c029d404>] (sata_oxnas_post_reset_init+0x3c/0x178) [ 1.060984] [<c029d404>] (sata_oxnas_post_reset_init) from [<c029d618>] (sata_oxnas_port_start+0xd8/0x12c) [ 1.070597] [<c029d618>] (sata_oxnas_port_start) from [<c02873ac>] (ata_host_start+0xe0/0x1c0) [ 1.079170] [<c02873ac>] (ata_host_start) from [<c0288018>] (ata_host_activate+0x20/0x100) [ 1.087398] [<c0288018>] (ata_host_activate) from [<c029dbc8>] (sata_oxnas_probe+0x218/0x284) [ 1.095884] [<c029dbc8>] (sata_oxnas_probe) from [<c026e380>] (platform_drv_probe+0x1c/0x4c) [ 1.104284] [<c026e380>] (platform_drv_probe) from [<c026d108>] (driver_probe_device+0x94/0x228) [ 1.113026] [<c026d108>] (driver_probe_device) from [<c026d328>] (__driver_attach+0x8c/0x90) [ 1.121431] [<c026d328>] (__driver_attach) from [<c026bb14>] (bus_for_each_dev+0x74/0x98) [ 1.129571] [<c026bb14>] (bus_for_each_dev) from [<c026c2e4>] (bus_add_driver+0x124/0x1d4) [ 1.137794] [<c026c2e4>] (bus_add_driver) from [<c026d68c>] (driver_register+0x78/0xf8) [ 1.145761] [<c026d68c>] (driver_register) from [<c00087f0>] (do_one_initcall+0x30/0x148) [ 1.153902] [<c00087f0>] (do_one_initcall) from [<c05fb50c>] (kernel_init_freeable+0xf4/0x1c4) [ 1.162480] [<c05fb50c>] (kernel_init_freeable) from [<c0485044>] (kernel_init+0x8/0xec) [ 1.170534] [<c0485044>] (kernel_init) from [<c0009558>] (ret_from_fork+0x14/0x3c) [ 1.178063] Code: e7903003 e3a00000 e5933000 ee070f9a (e5832070) [ 1.184248] ---[ end trace 31ab87e07c29be4e ]--- [ 1.188861] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.188861] [ 1.197959] CPU0: stopping [ 1.200660] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.3 #8 [ 1.207603] [<c000fb2c>] (unwind_backtrace) from [<c000c2d0>] (show_stack+0x10/0x14) [ 1.215313] [<c000c2d0>] (show_stack) from [<c0486e3c>] (dump_stack+0x74/0x90) [ 1.222507] [<c0486e3c>] (dump_stack) from [<c000e6bc>] (handle_IPI+0x13c/0x17c) [ 1.229867] [<c000e6bc>] (handle_IPI) from [<c0008578>] (gic_handle_irq+0x58/0x60) [ 1.237401] [<c0008578>] (gic_handle_irq) from [<c000cbe0>] (__irq_svc+0x40/0x50) [ 1.244840] Exception stack(0xc0623f50 to 0xc0623f98) [ 1.249863] 3f40: 00000000 00000000 00000000 00000000 [ 1.258001] 3f60: c0622000 00000000 c06306b0 c0630650 c0657154 c0657154 00000001 c048c558 [ 1.266140] 3f80: c0630650 c0623f98 c000a454 c000a458 60000113 ffffffff [ 1.272727] [<c000cbe0>] (__irq_svc) from [<c000a458>] (arch_cpu_idle+0x28/0x30) [ 1.280092] [<c000a458>] (arch_cpu_idle) from [<c004c054>] (cpu_startup_entry+0xa0/0x138) [ 1.288238] [<c004c054>] (cpu_startup_entry) from [<c05fbac4>] (start_kernel+0x290/0x2e0) [ 1.296376] [<c05fbac4>] (start_kernel) from [<6000806c>] (0x6000806c) [ 1.302873] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.302873]
But if I let the sata_oxnas.c untouched, the kernel is booting, and finds both ports but there are some errors on port 2. But port 1, here sdb, seams to work ok.
Reading data from 0x4bf800 -- 100% complete. 2621440 bytes read: OK ## Booting image at 60500000 ... Image Name: Linux-3.11.1+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3386044 Bytes = 3.2 MB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 64000000 ... Image Name: Wheezy Ramdisk Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 1841056 Bytes = 1.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.3 (peacemaker@DebianWheezy) (gcc version 4.4.5 (Debian 4.4.5-8) ) #10 SMP Tue Sep 30 17:21:04 CEST 2014 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Shuttle KD20 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 7 pages/cpu @cfde2000 s6496 r8192 d13984 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,115200 mac_adr=0x00,0x25,0xb1,0xff,0xff,0x00 mem=256M poweroutage=yes [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 253076K/262144K available (4748K kernel code, 212K rwdata, 1340K rodata, 154K init, 226K bss, 9068K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc05fa448 (6090 kB) [ 0.000000] .init : 0xc05fb000 - 0xc0621960 ( 155 kB) [ 0.000000] .data : 0xc0622000 - 0xc06572e0 ( 213 kB) [ 0.000000] .bss : 0xc06572e8 - 0xc068fb60 ( 227 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000197] Console: colour dummy device 80x30 [ 0.000222] Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896) [ 0.050037] pid_max: default: 32768 minimum: 301 [ 0.050178] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050193] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050913] CPU: Testing write buffer coherency: ok [ 0.051246] Setting up static identity map for 0x6048ad68 - 0x6048ada0 [ 0.052771] CPU1: Booted secondary processor [ 0.110195] Brought up 2 CPUs [ 0.110218] SMP: Total of 2 processors activated. [ 0.111104] devtmpfs: initialized [ 0.114083] pinctrl core: initialized pinctrl subsystem [ 0.116142] NET: Registered protocol family 16 [ 0.116625] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.120094] gpio-oxnas 44000000.gpio: at address d0846000 [ 0.120332] gpio-oxnas 44100000.gpio: at address d0848000 [ 0.120716] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver [ 0.238656] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5 [ 0.248970] oxnas-pcie 47c0: link up [ 0.249177] oxnas-pcie 47c0: PCI host bridge to bus 0000:00 [ 0.249200] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.249218] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.249233] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff] [ 0.249251] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.249692] PCI: bus0: Fast back to back transfers disabled [ 0.249766] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48007fff 64bit] [ 0.250122] vgaarb: loaded [ 0.250483] SCSI subsystem initialized [ 0.251179] usbcore: registered new interface driver usbfs [ 0.251264] usbcore: registered new interface driver hub [ 0.251468] usbcore: registered new device driver usb [ 0.251548] pps_core: LinuxPPS API ver. 1 registered [ 0.251560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.251591] PTP clock support registered [ 0.252720] cfg80211: Calling CRDA to update world regulatory domain [ 0.253004] Switched to clocksource rps_clocksource_timer [ 0.265144] NET: Registered protocol family 2 [ 0.265733] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.265794] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.265845] TCP: Hash tables configured (established 2048 bind 2048) [ 0.265927] TCP: reno registered [ 0.265955] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.265994] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.266216] NET: Registered protocol family 1 [ 0.266644] RPC: Registered named UNIX socket transport module. [ 0.266662] RPC: Registered udp transport module. [ 0.266670] RPC: Registered tcp transport module. [ 0.266680] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.266721] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 0.267622] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.280629] fuse init (API version 7.23) [ 0.281303] msgmni has been set to 494 [ 0.283064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.283084] io scheduler noop registered [ 0.283097] io scheduler deadline registered [ 0.283386] io scheduler cfq registered (default) [ 0.283806] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.284902] console [ttyS0] disabled [ 0.284945] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 0.788152] console [ttyS0] enabled [ 0.793367] scsi0 : sata_oxnas [ 0.796940] ata1: SATA max UDMA/133 irq 50 [ 0.801308] ox820sata: reseting SATA core [ 0.810268] scsi1 : sata_oxnas [ 0.813611] ata2: SATA max UDMA/133 irq 50 [ 0.818688] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.825059] nand: Hynix H27U1G8F2BTR-BC [ 0.828879] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 0.830085] ox820sata: reseting SATA core [ 0.838512] Scanning device for bad blocks [ 0.891678] Bad eraseblock 618 at 0x000004d40000 [ 0.928427] 2 ofpart partitions found on MTD device 41000000.nand [ 0.934497] Creating 2 MTD partitions on "41000000.nand": [ 0.939870] 0x000000000000-0x000000e00000 : "boot" [ 0.945766] 0x000000e00000-0x000008000000 : "ubi" [ 0.951866] stmmaceth 40400000.ethernet: snps,phy-addr property is deprecated [ 0.959065] stmmaceth 40400000.ethernet: no reset control found [ 0.964976] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 0.969994] Ring mode enabled [ 0.973050] DMA HW capability register supported [ 0.977556] Enhanced/Alternate descriptors [ 0.981882] Enabled extended descriptors [ 0.985881] RX Checksum Offload Engine supported (type 2) [ 0.991331] TX Checksum insertion supported [ 0.995584] Wake-Up On Lan supported [ 0.999224] Enable RX Mitigation via HW Watchdog Timer [ 1.006935] libphy: stmmac: probed [ 1.010324] eth0: PHY ID 02430d91 at 1 IRQ 0 (stmmac-0:01) active [ 1.016604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.023119] ehci-pci: EHCI PCI platform driver [ 1.027809] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.033323] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.041044] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100 [ 1.062878] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.069178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.075983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.083187] usb usb1: Product: EHCI Host Controller [ 1.088040] usb usb1: Manufacturer: Linux 3.15.3 ehci_hcd [ 1.093422] usb usb1: SerialNumber: 40200100.ehci [ 1.098826] hub 1-0:1.0: USB hub found [ 1.102622] hub 1-0:1.0: 2 ports detected [ 1.107246] usbcore: registered new interface driver usb-storage [ 1.113543] mousedev: PS/2 mouse device common for all mice [ 1.120286] usbcore: registered new interface driver usbhid [ 1.125859] usbhid: USB HID core driver [ 1.129871] TCP: cubic registered [ 1.134041] NET: Registered protocol family 10 [ 1.139532] sit: IPv6 over IPv4 tunneling driver [ 1.145003] NET: Registered protocol family 17 [ 1.250012] ata1: link resume succeeded after 1 retries [ 1.350016] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.422894] usb 1-2: new high-speed USB device number 2 using oxnas-ehci [ 1.530014] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.583475] usb 1-2: New USB device found, idVendor=05dc, idProduct=a833 [ 1.590184] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.597286] usb 1-2: Product: USB Flash Drive [ 1.601646] usb 1-2: Manufacturer: Lexar [ 1.605552] usb 1-2: SerialNumber: AABDM48HB1QX23XG [ 1.611712] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1.618263] scsi2 : usb-storage 1-2:1.0 [ 2.779095] scsi 2:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6 [ 2.789790] sd 2:0:0:0: [sda] 62537728 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 2.798535] sd 2:0:0:0: [sda] Write Protect is off [ 2.804403] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.832642] sda: sda1 [ 2.840535] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 6.350026] ata2.00: qc timeout (cmd 0xec) [ 6.354104] ox820sata: reseting SATA core [ 6.530012] ata1.00: qc timeout (cmd 0xec) [ 6.534087] ox820sata: reseting SATA core [ 6.800005] ata2: link resume succeeded after 1 retries [ 6.890017] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 6.920012] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 7.400012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 7.430018] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 12.400015] ata1.00: qc timeout (cmd 0x27) [ 12.404090] ox820sata: reseting SATA core [ 12.760017] ata1.00: failed to read native max address (err_mask=0x4) [ 12.766428] ata1.00: HPA support seems broken, skipping HPA handling [ 13.280017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 13.287439] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133 [ 13.293882] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 13.302028] ata1.00: configured for UDMA/133 [ 13.306708] scsi 0:0:0:0: Direct-Access ATA ST320LT007-9ZV14 0004 PQ: 0 ANSI: 5 [ 13.316057] sd 0:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.323545] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ 13.329154] sd 0:0:0:0: [sdb] Write Protect is off [ 13.334169] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.385244] sdb: sdb1 [ 13.389155] sd 0:0:0:0: [sdb] Attached SCSI disk [ 17.430028] ata2.00: qc timeout (cmd 0xec) [ 17.434106] ox820sata: reseting SATA core [ 17.790013] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 17.796080] ata2: limiting SATA link speed to 1.5 Gbps [ 18.310016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.310028] ata2.00: qc timeout (cmd 0xec) [ 48.314101] ox820sata: reseting SATA core [ 48.670016] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 49.180024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.189068] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240) [ 49.200816] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 49.222648] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 49.230359] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 49.239864] devtmpfs: mounted [ 49.243107] Freeing unused kernel memory: 152K (c05fb000 - c0621000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 50.404328] udevd[170]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [....] Waiting for /dev to be fully populated...[ 81.180052] ox820sata: reseting SATA core [ 81.540047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 81.547072] ata1.00: failed command: IDENTIFY DEVICE [ 81.552051] ata1.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 2 pio 512 in [ 81.552051] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 81.566512] ata1.00: status: { DRDY } [ 81.570183] ata1: hard resetting link [ 82.080043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 82.089154] ata1.00: configured for UDMA/133 [ 82.093537] ata1: EH complete [ 82.639011] random: nonblocking pool is initialized done. [ ok ] Activating swap...done. [ 83.767475] EXT4-fs (sda1): re-mounted. Opts: (null) [ ok ] Cleaning up temporary files... /tmp. [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.20.1 done. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [ ok ] Configuring network interfaces...done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting rpcbind daemon...[....] Already running.. [ ok ] Starting enhanced syslogd: rsyslogd. [ ok ] Starting NFS common utilities: statd. [ ok ] Starting periodic command scheduler: cron. [ ok ] Starting OpenBSD Secure Shell server: sshd. [ 92.693073] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Debian GNU/Linux 7 oxnas ttyS0 oxnas login:
So maybe someone has an idea how to fix somethink here.