Thanks to both of you.
I tried to add to
dts:
sata@45910000 {
status = "okay";
};
dtsi:
sata@45910000 {
compatible = "plxtech,nas782x-sata";
/* port sgdma core */
reg = <0x45910000 0x100>, <0x459B0010 0x10>, <0x459E0000 0x2000>,
/* phy descriptors (optional) */
<0x44900000 0x0C>, <0x50000000 0x1000>;
interrupts = <0 18 0x304>;
clocks = <&stdclk 4>;
resets = <&rst 11>, <&rst 12>, <&rst 13>;
reset-names = "sata", "link", "phy";
status = "disabled";
};
And changed the max ports from 1 to 2. in the sata_oxnas.c
SATA_OXNAS_MAX_PORTS = 2
Compiling was ok, but the kernel panics:
Reading data from 0x4bf800 -- 100% complete.
2621440 bytes read: OK
## Booting image at 60500000 ...
Image Name: Linux-3.11.1+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3386100 Bytes = 3.2 MB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 64000000 ...
Image Name: Wheezy Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 1841056 Bytes = 1.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.15.3 (peacemaker@DebianWheezy) (gcc version 4.4.5 (Debian 4.4.5-8) ) #8 SMP Tue Sep 30 16:59:21 CEST 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Shuttle KD20
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] Start Ox820 platform
[ 0.000000] PERCPU: Embedded 7 pages/cpu @cfde2000 s6496 r8192 d13984 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/sdc1 console=ttyS0,115200 mac_adr=0x00,0x25,0xb1,0xff,0xff,0x00 mem=256M poweroutage=yes
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 253076K/262144K available (4748K kernel code, 212K rwdata, 1340K rodata, 154K init, 226K bss, 9068K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05fa448 (6090 kB)
[ 0.000000] .init : 0xc05fb000 - 0xc0621960 ( 155 kB)
[ 0.000000] .data : 0xc0622000 - 0xc06572e0 ( 213 kB)
[ 0.000000] .bss : 0xc06572e8 - 0xc068fb60 ( 227 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns
[ 0.000192] Console: colour dummy device 80x30
[ 0.000220] Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896)
[ 0.050035] pid_max: default: 32768 minimum: 301
[ 0.050170] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050186] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050897] CPU: Testing write buffer coherency: ok
[ 0.051235] Setting up static identity map for 0x6048ad90 - 0x6048adc8
[ 0.052725] CPU1: Booted secondary processor
[ 0.110192] Brought up 2 CPUs
[ 0.110213] SMP: Total of 2 processors activated.
[ 0.111093] devtmpfs: initialized
[ 0.114024] pinctrl core: initialized pinctrl subsystem
[ 0.116177] NET: Registered protocol family 16
[ 0.116664] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.120017] gpio-oxnas 44000000.gpio: at address d0846000
[ 0.120258] gpio-oxnas 44100000.gpio: at address d0848000
[ 0.120647] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver
[ 0.238046] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5
[ 0.248348] oxnas-pcie 47c0: link up
[ 0.248558] oxnas-pcie 47c0: PCI host bridge to bus 0000:00
[ 0.248581] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.248596] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.248611] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff]
[ 0.248627] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.249072] PCI: bus0: Fast back to back transfers disabled
[ 0.249146] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48007fff 64bit]
[ 0.249482] vgaarb: loaded
[ 0.249838] SCSI subsystem initialized
[ 0.250549] usbcore: registered new interface driver usbfs
[ 0.250636] usbcore: registered new interface driver hub
[ 0.250836] usbcore: registered new device driver usb
[ 0.250920] pps_core: LinuxPPS API ver. 1 registered
[ 0.250933] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.250964] PTP clock support registered
[ 0.252103] cfg80211: Calling CRDA to update world regulatory domain
[ 0.252387] Switched to clocksource rps_clocksource_timer
[ 0.264279] NET: Registered protocol family 2
[ 0.264867] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.264929] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.264983] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.265059] TCP: reno registered
[ 0.265085] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.265126] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.265354] NET: Registered protocol family 1
[ 0.265779] RPC: Registered named UNIX socket transport module.
[ 0.265799] RPC: Registered udp transport module.
[ 0.265809] RPC: Registered tcp transport module.
[ 0.265817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.265858] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.266777] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.280074] fuse init (API version 7.23)
[ 0.280768] msgmni has been set to 494
[ 0.282429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.282449] io scheduler noop registered
[ 0.282462] io scheduler deadline registered
[ 0.282744] io scheduler cfq registered (default)
[ 0.283176] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.284295] console [ttyS0] disabled
[ 0.284334] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 0.787479] console [ttyS0] enabled
[ 0.791895] Unable to handle kernel NULL pointer dereference at virtual address 00000070
[ 0.800005] pgd = c0004000
[ 0.802698] [00000070] *pgd=00000000
[ 0.806266] Internal error: Oops: 805 [#1] SMP ARM
[ 0.811025] Modules linked in:
[ 0.814062] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.3 #8
[ 0.819947] task: cf840000 ti: cf844000 task.ti: cf844000
[ 0.825326] PC is at sata_oxnas_link_write+0x14/0x50
[ 0.830264] LR is at sata_oxnas_post_reset_init+0x3c/0x178
[ 0.835719] pc : [<c029cde8>] lr : [<c029d404>] psr: 80000113
[ 0.835719] sp : cf845d80 ip : c06465c0 fp : cf8b3610
[ 0.847137] r10: cf87f198 r9 : c029dc34 r8 : 00002368
[ 0.852331] r7 : cf8b3610 r6 : 00000000 r5 : cf9d8000 r4 : cf87d880
[ 0.858818] r3 : 00000000 r2 : 00030003 r1 : 0000000c r0 : 00000000
[ 0.865310] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 0.872578] Control: 00c5787d Table: 6000400a DAC: 00000015
[ 0.878289] Process swapper/0 (pid: 1, stack limit = 0xcf8441c0)
[ 0.884259] Stack: (0xcf845d80 to 0xcf846000)
[ 0.888596] 5d80: cf9d8000 cf87d880 cf87f130 cf8b3610 cf9d8000 c029dc34 cf87f198 c029d618
[ 0.896734] 5da0: 00000001 cf87f198 c029dc34 50000800 cf9d4000 00000001 cf87f190 00000000
[ 0.904872] 5dc0: cf87d830 c02873ac cf87f190 00000032 c0646620 00000080 d085a000 c029dc34
[ 0.913011] 5de0: 00000000 c0288018 d085a000 c0287994 00000000 cf807300 cf807300 d085e000
[ 0.921152] 5e00: d085c000 d0860000 d085a000 cf87f130 00000000 c029dbc8 c0646620 00000000
[ 0.929287] 5e20: 00000001 50000000 50000fff cfdf7dc0 00000200 00000000 00000000 00000000
[ 0.937428] 5e40: c04a2884 00000000 00000000 cf8b3610 c06465c4 c06465d8 00000000 00000000
[ 0.945566] 5e60: c061f33c c0683868 00000000 c026e380 c0683868 cf8b3610 c06465d8 c026d108
[ 0.953704] 5e80: cf8b3610 c06465d8 cf8b3644 00000000 0000008d c061f33c c0617c18 c026d328
[ 0.961845] 5ea0: c06465d8 c026d29c cf845eb0 c026bb14 cf82445c cf8b40f4 c06457b8 c06465d8
[ 0.969984] 5ec0: cf87f0c0 c06457b8 00000000 c026c2e4 c059471c c026d6bc c06465d8 c06465d8
[ 0.978122] 5ee0: 00000007 cf844000 00000000 c026d68c c060edcc 00000007 cf844000 c00087f0
[ 0.986260] 5f00: c067ad88 cf845f3c 00000000 00000000 00000000 c010847c 00000000 cf8a1540
[ 0.994401] 5f20: 00000000 c06354e8 60000113 00000000 c05daa7c cfffc19f c05daa8c c00306f0
[ 1.002539] 5f40: c05a0b90 c05da1bc 00000006 00000006 c06354b8 c0617c10 00000007 c0657300
[ 1.010677] 5f60: c05fb5dc 0000008d c061f33c c0617c18 00000000 c05fb50c 00000006 00000006
[ 1.018816] 5f80: c05fb5dc 00000000 00000000 c048503c 00000000 00000000 00000000 00000000
[ 1.026954] 5fa0: 00000000 c0485044 00000000 c0009558 00000000 00000000 00000000 00000000
[ 1.035092] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.043228] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.051371] [<c029cde8>] (sata_oxnas_link_write) from [<c029d404>] (sata_oxnas_post_reset_init+0x3c/0x178)
[ 1.060984] [<c029d404>] (sata_oxnas_post_reset_init) from [<c029d618>] (sata_oxnas_port_start+0xd8/0x12c)
[ 1.070597] [<c029d618>] (sata_oxnas_port_start) from [<c02873ac>] (ata_host_start+0xe0/0x1c0)
[ 1.079170] [<c02873ac>] (ata_host_start) from [<c0288018>] (ata_host_activate+0x20/0x100)
[ 1.087398] [<c0288018>] (ata_host_activate) from [<c029dbc8>] (sata_oxnas_probe+0x218/0x284)
[ 1.095884] [<c029dbc8>] (sata_oxnas_probe) from [<c026e380>] (platform_drv_probe+0x1c/0x4c)
[ 1.104284] [<c026e380>] (platform_drv_probe) from [<c026d108>] (driver_probe_device+0x94/0x228)
[ 1.113026] [<c026d108>] (driver_probe_device) from [<c026d328>] (__driver_attach+0x8c/0x90)
[ 1.121431] [<c026d328>] (__driver_attach) from [<c026bb14>] (bus_for_each_dev+0x74/0x98)
[ 1.129571] [<c026bb14>] (bus_for_each_dev) from [<c026c2e4>] (bus_add_driver+0x124/0x1d4)
[ 1.137794] [<c026c2e4>] (bus_add_driver) from [<c026d68c>] (driver_register+0x78/0xf8)
[ 1.145761] [<c026d68c>] (driver_register) from [<c00087f0>] (do_one_initcall+0x30/0x148)
[ 1.153902] [<c00087f0>] (do_one_initcall) from [<c05fb50c>] (kernel_init_freeable+0xf4/0x1c4)
[ 1.162480] [<c05fb50c>] (kernel_init_freeable) from [<c0485044>] (kernel_init+0x8/0xec)
[ 1.170534] [<c0485044>] (kernel_init) from [<c0009558>] (ret_from_fork+0x14/0x3c)
[ 1.178063] Code: e7903003 e3a00000 e5933000 ee070f9a (e5832070)
[ 1.184248] ---[ end trace 31ab87e07c29be4e ]---
[ 1.188861] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.188861]
[ 1.197959] CPU0: stopping
[ 1.200660] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.3 #8
[ 1.207603] [<c000fb2c>] (unwind_backtrace) from [<c000c2d0>] (show_stack+0x10/0x14)
[ 1.215313] [<c000c2d0>] (show_stack) from [<c0486e3c>] (dump_stack+0x74/0x90)
[ 1.222507] [<c0486e3c>] (dump_stack) from [<c000e6bc>] (handle_IPI+0x13c/0x17c)
[ 1.229867] [<c000e6bc>] (handle_IPI) from [<c0008578>] (gic_handle_irq+0x58/0x60)
[ 1.237401] [<c0008578>] (gic_handle_irq) from [<c000cbe0>] (__irq_svc+0x40/0x50)
[ 1.244840] Exception stack(0xc0623f50 to 0xc0623f98)
[ 1.249863] 3f40: 00000000 00000000 00000000 00000000
[ 1.258001] 3f60: c0622000 00000000 c06306b0 c0630650 c0657154 c0657154 00000001 c048c558
[ 1.266140] 3f80: c0630650 c0623f98 c000a454 c000a458 60000113 ffffffff
[ 1.272727] [<c000cbe0>] (__irq_svc) from [<c000a458>] (arch_cpu_idle+0x28/0x30)
[ 1.280092] [<c000a458>] (arch_cpu_idle) from [<c004c054>] (cpu_startup_entry+0xa0/0x138)
[ 1.288238] [<c004c054>] (cpu_startup_entry) from [<c05fbac4>] (start_kernel+0x290/0x2e0)
[ 1.296376] [<c05fbac4>] (start_kernel) from [<6000806c>] (0x6000806c)
[ 1.302873] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.302873]
But if I let the sata_oxnas.c untouched, the kernel is booting, and finds both ports but there are some errors on port 2. But port 1, here sdb, seams to work ok.
Reading data from 0x4bf800 -- 100% complete.
2621440 bytes read: OK
## Booting image at 60500000 ...
Image Name: Linux-3.11.1+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3386044 Bytes = 3.2 MB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 64000000 ...
Image Name: Wheezy Ramdisk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 1841056 Bytes = 1.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.15.3 (peacemaker@DebianWheezy) (gcc version 4.4.5 (Debian 4.4.5-8) ) #10 SMP Tue Sep 30 17:21:04 CEST 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Shuttle KD20
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] Start Ox820 platform
[ 0.000000] PERCPU: Embedded 7 pages/cpu @cfde2000 s6496 r8192 d13984 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,115200 mac_adr=0x00,0x25,0xb1,0xff,0xff,0x00 mem=256M poweroutage=yes
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 253076K/262144K available (4748K kernel code, 212K rwdata, 1340K rodata, 154K init, 226K bss, 9068K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05fa448 (6090 kB)
[ 0.000000] .init : 0xc05fb000 - 0xc0621960 ( 155 kB)
[ 0.000000] .data : 0xc0622000 - 0xc06572e0 ( 213 kB)
[ 0.000000] .bss : 0xc06572e8 - 0xc068fb60 ( 227 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns
[ 0.000197] Console: colour dummy device 80x30
[ 0.000222] Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896)
[ 0.050037] pid_max: default: 32768 minimum: 301
[ 0.050178] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050193] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050913] CPU: Testing write buffer coherency: ok
[ 0.051246] Setting up static identity map for 0x6048ad68 - 0x6048ada0
[ 0.052771] CPU1: Booted secondary processor
[ 0.110195] Brought up 2 CPUs
[ 0.110218] SMP: Total of 2 processors activated.
[ 0.111104] devtmpfs: initialized
[ 0.114083] pinctrl core: initialized pinctrl subsystem
[ 0.116142] NET: Registered protocol family 16
[ 0.116625] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.120094] gpio-oxnas 44000000.gpio: at address d0846000
[ 0.120332] gpio-oxnas 44100000.gpio: at address d0848000
[ 0.120716] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver
[ 0.238656] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5
[ 0.248970] oxnas-pcie 47c0: link up
[ 0.249177] oxnas-pcie 47c0: PCI host bridge to bus 0000:00
[ 0.249200] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.249218] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.249233] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff]
[ 0.249251] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.249692] PCI: bus0: Fast back to back transfers disabled
[ 0.249766] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x48007fff 64bit]
[ 0.250122] vgaarb: loaded
[ 0.250483] SCSI subsystem initialized
[ 0.251179] usbcore: registered new interface driver usbfs
[ 0.251264] usbcore: registered new interface driver hub
[ 0.251468] usbcore: registered new device driver usb
[ 0.251548] pps_core: LinuxPPS API ver. 1 registered
[ 0.251560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.251591] PTP clock support registered
[ 0.252720] cfg80211: Calling CRDA to update world regulatory domain
[ 0.253004] Switched to clocksource rps_clocksource_timer
[ 0.265144] NET: Registered protocol family 2
[ 0.265733] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.265794] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.265845] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.265927] TCP: reno registered
[ 0.265955] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.265994] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.266216] NET: Registered protocol family 1
[ 0.266644] RPC: Registered named UNIX socket transport module.
[ 0.266662] RPC: Registered udp transport module.
[ 0.266670] RPC: Registered tcp transport module.
[ 0.266680] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.266721] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.267622] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.280629] fuse init (API version 7.23)
[ 0.281303] msgmni has been set to 494
[ 0.283064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.283084] io scheduler noop registered
[ 0.283097] io scheduler deadline registered
[ 0.283386] io scheduler cfq registered (default)
[ 0.283806] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.284902] console [ttyS0] disabled
[ 0.284945] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 0.788152] console [ttyS0] enabled
[ 0.793367] scsi0 : sata_oxnas
[ 0.796940] ata1: SATA max UDMA/133 irq 50
[ 0.801308] ox820sata: reseting SATA core
[ 0.810268] scsi1 : sata_oxnas
[ 0.813611] ata2: SATA max UDMA/133 irq 50
[ 0.818688] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 0.825059] nand: Hynix H27U1G8F2BTR-BC
[ 0.828879] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.830085] ox820sata: reseting SATA core
[ 0.838512] Scanning device for bad blocks
[ 0.891678] Bad eraseblock 618 at 0x000004d40000
[ 0.928427] 2 ofpart partitions found on MTD device 41000000.nand
[ 0.934497] Creating 2 MTD partitions on "41000000.nand":
[ 0.939870] 0x000000000000-0x000000e00000 : "boot"
[ 0.945766] 0x000000e00000-0x000008000000 : "ubi"
[ 0.951866] stmmaceth 40400000.ethernet: snps,phy-addr property is deprecated
[ 0.959065] stmmaceth 40400000.ethernet: no reset control found
[ 0.964976] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 0.969994] Ring mode enabled
[ 0.973050] DMA HW capability register supported
[ 0.977556] Enhanced/Alternate descriptors
[ 0.981882] Enabled extended descriptors
[ 0.985881] RX Checksum Offload Engine supported (type 2)
[ 0.991331] TX Checksum insertion supported
[ 0.995584] Wake-Up On Lan supported
[ 0.999224] Enable RX Mitigation via HW Watchdog Timer
[ 1.006935] libphy: stmmac: probed
[ 1.010324] eth0: PHY ID 02430d91 at 1 IRQ 0 (stmmac-0:01) active
[ 1.016604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.023119] ehci-pci: EHCI PCI platform driver
[ 1.027809] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 1.033323] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 1.041044] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100
[ 1.062878] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 1.069178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.075983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.083187] usb usb1: Product: EHCI Host Controller
[ 1.088040] usb usb1: Manufacturer: Linux 3.15.3 ehci_hcd
[ 1.093422] usb usb1: SerialNumber: 40200100.ehci
[ 1.098826] hub 1-0:1.0: USB hub found
[ 1.102622] hub 1-0:1.0: 2 ports detected
[ 1.107246] usbcore: registered new interface driver usb-storage
[ 1.113543] mousedev: PS/2 mouse device common for all mice
[ 1.120286] usbcore: registered new interface driver usbhid
[ 1.125859] usbhid: USB HID core driver
[ 1.129871] TCP: cubic registered
[ 1.134041] NET: Registered protocol family 10
[ 1.139532] sit: IPv6 over IPv4 tunneling driver
[ 1.145003] NET: Registered protocol family 17
[ 1.250012] ata1: link resume succeeded after 1 retries
[ 1.350016] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.422894] usb 1-2: new high-speed USB device number 2 using oxnas-ehci
[ 1.530014] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.583475] usb 1-2: New USB device found, idVendor=05dc, idProduct=a833
[ 1.590184] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.597286] usb 1-2: Product: USB Flash Drive
[ 1.601646] usb 1-2: Manufacturer: Lexar
[ 1.605552] usb 1-2: SerialNumber: AABDM48HB1QX23XG
[ 1.611712] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 1.618263] scsi2 : usb-storage 1-2:1.0
[ 2.779095] scsi 2:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
[ 2.789790] sd 2:0:0:0: [sda] 62537728 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.798535] sd 2:0:0:0: [sda] Write Protect is off
[ 2.804403] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.832642] sda: sda1
[ 2.840535] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 6.350026] ata2.00: qc timeout (cmd 0xec)
[ 6.354104] ox820sata: reseting SATA core
[ 6.530012] ata1.00: qc timeout (cmd 0xec)
[ 6.534087] ox820sata: reseting SATA core
[ 6.800005] ata2: link resume succeeded after 1 retries
[ 6.890017] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 6.920012] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.400012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7.430018] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 12.400015] ata1.00: qc timeout (cmd 0x27)
[ 12.404090] ox820sata: reseting SATA core
[ 12.760017] ata1.00: failed to read native max address (err_mask=0x4)
[ 12.766428] ata1.00: HPA support seems broken, skipping HPA handling
[ 13.280017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.287439] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133
[ 13.293882] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 13.302028] ata1.00: configured for UDMA/133
[ 13.306708] scsi 0:0:0:0: Direct-Access ATA ST320LT007-9ZV14 0004 PQ: 0 ANSI: 5
[ 13.316057] sd 0:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 13.323545] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[ 13.329154] sd 0:0:0:0: [sdb] Write Protect is off
[ 13.334169] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.385244] sdb: sdb1
[ 13.389155] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 17.430028] ata2.00: qc timeout (cmd 0xec)
[ 17.434106] ox820sata: reseting SATA core
[ 17.790013] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 17.796080] ata2: limiting SATA link speed to 1.5 Gbps
[ 18.310016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.310028] ata2.00: qc timeout (cmd 0xec)
[ 48.314101] ox820sata: reseting SATA core
[ 48.670016] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 49.180024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 49.189068] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 49.200816] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 49.222648] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 49.230359] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 49.239864] devtmpfs: mounted
[ 49.243107] Freeing unused kernel memory: 152K (c05fb000 - c0621000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 50.404328] udevd[170]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 81.180052] ox820sata: reseting SATA core
[ 81.540047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 81.547072] ata1.00: failed command: IDENTIFY DEVICE
[ 81.552051] ata1.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 2 pio 512 in
[ 81.552051] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 81.566512] ata1.00: status: { DRDY }
[ 81.570183] ata1: hard resetting link
[ 82.080043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 82.089154] ata1.00: configured for UDMA/133
[ 82.093537] ata1: EH complete
[ 82.639011] random: nonblocking pool is initialized
done.
[ ok ] Activating swap...done.
[ 83.767475] EXT4-fs (sda1): re-mounted. Opts: (null)
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Starting rpcbind daemon....
[ ok ] Starting NFS common utilities: statd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting rpcbind daemon...[....] Already running..
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting NFS common utilities: statd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ 92.693073] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Debian GNU/Linux 7 oxnas ttyS0
oxnas login:
So maybe someone has an idea how to fix somethink here.