Re: Debian on Shuttle KD20 (PLX OXNAS 7821)
Anybody solved problem with USB 3.0 and Cardreader?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
@Peacemaker Can you reupload uImage3.18_2 file or newer?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Okay, USB 3.0 and Cardreader is still buggy, so I left it out of the Kernel. uImage3.18.1_7 the 3.18.1_7 is my current Kernel One other think is that the samba performace is quite bad, even with some...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Samba even in original kd20 (firm.2.38) is not fast. I use vsftpd to get files from KD20 and have 70-75MB/sek while on samba only 35 (raid1).
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
@Peacemaker Can you explain how to make installation - step by step? Is the console conection is require - how to dismantle this device?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
@Kluch: Okay I thought you can reach ~40mb/s wright and 80mb/s read. with the original FW Sure, I can do that the next days step by step. But for now: For dismantle the device you can thank Crosser...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
@Peacemaker If I choose first solution. How can i back to original firmware ? This two files uImage3.18.1_7 and Initrd_w i should pun on disk with witch file system?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
If you "hacked" into your device you can just backup the nand with dd, if not you can do this from debian or from just ask me for my nand backup :-) Befor you start: +Connect to the UART and see if...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Peacemaker, > If you "hacked" into your device you can just > backup the nand with dd, if not you can do this > from debian or from just ask me for my nand backup > :-) Shouldn't backup...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
On the mainboard of Omninas i do not have any pin to connect uart cable(console). Do I have to solder this pins for console ?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Jacq Wrote: ------------------------------------------------------- > On the mainboard of Omninas i do not have any pin > to connect uart cable(console). > Do I have to solder this pins for...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Where are the screws? I found only two near hinges..
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Look at the pictures from crosser @ Google+ i linked it.
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Hi Guys, Very nice work. I look forward hacking my K20. But I would like to do it would out soldering. Is there a way I just replace the system partition? If no choice I would like to find a more...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Hey, @DeDenker: You don't have to replace the uboot. I work with stock Uboot. But you need a way to access it, and there for a serial connection via UART is simply the best. The soldering is not a too...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Tftp generate a lot of problems.. How to upload uImage3.18.1_7, uInitrd_w from e.g. usb memory?
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
I uploaded everything via tftp and it is working most of the time quote good. What kind of error do you get? Maybe wie can fix.
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
It's look like: Shuttle>> setenv gatewayip 192.168.1.1; Shuttle> tftp 64000000 uImage3.18.1_7; tftp 60500000 uInitrd_w; Wait GMAC to reset Wait for PHY reset PHY is IC+ IP1001LF Wait for link...
View ArticleRe: Debian on Shuttle KD20 (PLX OXNAS 7821)
Okay, load things from usb will not work, from sata you can load data. These errors comes most of the time from bad network settings. As your server has really the IP 213.x.x.x, this might not to be...
View Article